Lift and elevators

Key to any application that utilises a motor to operate a lift or escalator is to ensure the motor rotates in the correct direction. Our L-Series Phase Monitors that have built-in Phase sequence detection will guarantee the motor can only run provided the sequence is correct.

Additionally, our Temperature relays can be used to monitor the temperature of the motor (by built-in thermistor) and shut down if the temperature exceeds a set-point. Speed relays can also be used to check that equipment is moving and sense when it stops.

Suggested products:

LXPRC/S

• Under and Over voltage monitoring (Window)
• Monitors own three phase, 3-wire supply
• Detects incorrect phase sequence and phase loss
• Adjustable Trip levels and Time delay
• SPDT Relay output
• 17.5mm wide, DIN Rail mount
• UL Listed

View

LTMR

• Over Temperature detection
• Used in conjunction with PTC thermistors to DIN 44081
• Auto-resetting
• Isolated Auxiliary Supply
• SPDT Relay output
• 17.5mm wide, DIN Rail mount

View

LESW

• Delay Off (Switch Initiated)
• Re-triggerable function
• Additional external loads can also be controlled by same trigger contact
• Multi-voltage (12 – 230VAC/DC)
• Multi-time range (0.1s – 100h)
• SPDT Relay output
• 17.5mm wide, DIN Rail mount
• UL Listed

View